Sony MZ-NF610 - Manual (Page 31)

31
1
Make connections.
Use the appropriate connecting cord
to suit the source equipment*
. When
connecting the cable, make sure to
insert the connectors firmly.
∗
For details, see “Optional accessories”
(page 68)
2
Press N while pressing REC •
T MARK.
The recording starts.
3
Play the source you want to record.
Adding track marks
while recording
You can add track marks (track number)
while recording.
Adding track marks manually
1
While the recorder is recording, press
T MARK (press P-MODE/
on the
remote control).
Adding track marks
automatically (Auto Time
Mark)
Use this feature to add track marks
automatically at specified intervals when
recording through the analog input
connector. This function is convenient for
recording long period of time, such as
lectures, meetings, etc.
1
While the recorder is recording or in
recording pause, press MENU.
2
Press . or > repeatedly
“R-SET” appears in the display, and
then press ENTER.
3
Press . or > repeatedly
“TimeMk” appears in the display, and
then press ENTER.
“OFF” appears in the display.
4
Press > to show “ON” in the
display, and then press ENTER.
5
Press . or > repeatedly until
the desired time interval appears in
the display, and then press ENTER.
Pressing . or > changes the
time setting (Time:) by 1 minute,
within the range of 1 to 99 minutes.
To cancel Auto Time Mark
Select “OFF” in step 4 or stop recording.
MENU
T MARK
X
4-way control key
(ENTER • N, ., >, x)