Sony MZ-NF610 - Manual (Page 58)

58
Labeling (Name)
1
Enter the menu and select “EDIT” -
“Name”
2
Select one of the following:
The cursor appears in the display and the
track, group, or disc is ready to be labeled.
3
Press VOL + or – repeatedly to select
a letter and press the jog lever.
The selected letter stops flashing and
the cursor moves to the next input
position.
4
Repeat step 3 and enter all characters
of the label name.
5
Press and hold the jog lever for 2
seconds or more.
For the details and the recorder
operation, see page 38.
Labeling recorded groups
1
Select “ : Name” in step 2 of
“Labeling (Name)” (page 58) and do
steps 3 to 5 to label a group.
For the details and the recorder
operation, see page 48.
Re-labeling recordings
You can relabel recordings by following
the procedure of “Labeling (Name)”
(page 58).
For the details and the recorder
operation, see page 39.
Moving recorded tracks
1
While playing the track you want to
move, enter the menu and select
“EDIT” - “Move” - “
: Move”.
For example, “003 t Tr003” appears
in the display.
2
Slide the jog lever repeatedly until the
destination track number appears in
the display.
For example, “003 t Tr002” appears
in the display.
3
Press the jog lever to enter the
selection.
For details and the recorder
operation, see page 40.
When labeling a
track “ : Name”
When labeling a
disc “ : Name”
Functions Operation
To move the cursor to
the left or right Slide the jog lever
(., >)
To change the letter to
the one before/next one Press VOL +, –.
To enter a letter Press the jog lever
(NX/ENT).
To enter a name Press the jog lever
for 2 seconds or
more (NX/ENT).
To switch between
capital letters, small
letters, and numbers/
marks Press P-MODE/ .
To insert a blank space Press +.
To delete a letter Press –.
To cancel labeling Press x for 2
seconds or more.
The cursor flashes at the next input position.