Siemens HIPATH 1200 - Manual (Page 73)

Checking and Assigning Call Charges
73
Step by Step
Checking and Assigning Call
Charges
Displaying Call Charges
For the current call:
The display usually shows call charges at the end of a
call (default setting).
If you wish to display charges continuously during a call
in progress, the service personnel must request the
AOCD feature (Advice of Charge, During the Call) from
your carrier.
Some carriers also let you display toll-free external calls.
The message "Free of Charge" appears on the screen
either before or during the call.
For all past calls with remaining balance:
First the accrued call charges (sum) are displayed. After
about 5 seconds, the remaining available amount is dis-
played if the service personnel have specified a call
charge limit.
Press the key. The LED lights up.
> :
Select and confirm.
or
qji
Enter the code.
If a call is transferred, the charges are assigned to
the telephone to which the call was transferred.
Program/Service
*65=Show call charges?