Samsung 4240 - Manual (Page 27)

27
ENG
Your television has several settings which allow you to control
picture quality.
1 Press the MENU button.
Result: The main menu is displayed.
2 Press the † or … button to select Picture .
Result: The options available in the Picture group are
displayed.
3 Press the ENTER ( ) button.
4 Select the required option ( Custom , Colour Tone ) pressing the
† or … button.
5 Press the † or … button to select Custom . Press the ENTER
( ) button.
Result: The Custom menu is displayed.
6 Press the ENTER ( ) button to change the setting.
The options are displayed in the following order.
◆ Custom : Contrast , Brightness , Sharpness , Colour ,
Tint(NTSC ONLY)
➣
Custom Options available in PC, DVI Mode: Contrast ,
Brightness , Sharpness .
➣
The horizontal bar is displayed. Move the horizontal bar’s
cursor left or right by pressing the
œ or √ button.
➣
When the picture mode is set to Custom , the settings values
may vary depending on the input source.
(ex. RF, Video, Component, PC or DVI)
➣
If you make any changes to these settings, the picture
standard is automatically switched to the
Custom .
◆ Colour Tone : Cool2 , Cool1 , Normal , Warm1 , Warm2
7 When you are satisfied with the settings, press the EXIT/TV ( )
button to return to normal viewing.
➣
If you make any changes to these settings, the picture
standard is automatically switched to the
Custom .
Adjusting the Picture Settings
Custom TV
Contrast 70
Brightness 50
Sharpness 70
Colour 50
Tint G50 R50
Contrast 70
Mode : Dynamic √ √
Custom √ √
Colour Tone : Normal √ √
Colour Control √ √
Film Mode : Off √ √
Size : 16 : 9 √ √
DNIe : On √ √
PIP √ √
Picture
Move Enter Return
TV
Move Enter Return
Mode : Dynamic
Custom
Colour Tone : Normal
Colour Control
Film Mode : Off
Size : 16 : 9
DNIe : On
PIP
Picture
Move Enter Return
TV
Cool2
Cool1
Normal
Warm1
Warm2
BN68-00597A-01 4/2/04 6:38 PM Page 27