Samsung 4240 - Manual (Page 33)

33
ENG
Selecting the Picture Size
You can select the picture size which best corresponds to your
viewing requirements.
1 Press the MENU button.
Result: The main menu is displayed.
2 Press the † or … button to select Picture .
Result: The options available in the Picture group are
displayed.
3 Press the ENTER ( ) button.
4 Press the † or … button until the Size is selected. Press the
ENTER ( ) button
5 Press the † or … button to change the setting.
◆ Auto Wide : Expanding and pulling up the picture from 4:3 to
16:9 ratio.
◆ 16:9 : Sets the picture to 16:9 wide mode.
◆ Panorama : Use this mode for the wide aspect ratio of a
panoramic picture.
◆ Zoom : Magnify the size of the picture vertically on
screen.
◆ 14:9 : Magnify the size of the picture more than 4:3 .
◆ 4:3 : Sets the picture to 4:3 normal mode.
6 Press the ENTER ( ) button to confirm.
➣
◆ You can select these options by simply pressing the
P.SIZE button on the remote control.
◆ The picture size can not be changed in the PIP mode.
◆ Depending on the input source, the P.SIZE options
may vary.
Positioning and Sizing the screen using Zoom
➣
◆ Resizing the screen using the Zoom enables the
positioning and sizing of the screen to up/down
direction using the † or … button as well as the
screen size.
◆ Move the screen up/down using the † or … button
after selecting the by pressing the † or … button.
◆ Resize the screen vertically using the † or … button
after selecting the by pressing the † or … button.
◆ Screen enlargement operates only in TV/Video/
S-Video/Component1,2 input modes.
◆ PC/DVI modes prevents the screen enlargement
function.
Size
Move Enter Return
TV
Mode : Dynamic √ √
Custom √ √
Colour Tone : Normal √ √
Colour Control √ √
Film Mode : Off √ √
Size : 16 : 9 √ √
DNIe : On √ √
PIP √ √
Auto Wide
16:9
Panorama
Zoom
14:9
4:3
Picture
Move Enter Return
TV
PC to DVI Mode
Size
Move Enter Return
TV
Auto Wide
16:9
Panorama
Zoom
14:9
4:3
BN68-00597A-01 4/2/04 6:38 PM Page 33