Connecting the host adapter, Device(s) – Sun Microsystems LSI22320-SR User Manual
Page 18
8
Sun StorEdge PCI/PCI-X Dual Ultra320 SCSI Host Adapter Installation Guide • January 2007
Connecting the Host Adapter
Before you connect the host adapter to the storage device(s), do the following:
■
Refer to the release notes for the lists of supported cables and storage devices.
Downloading the release notes is described in
“To Access the Release Notes” on
.
■
Refer to
,
“Ultra320 SCSI Configuration” on page 13
for general
information on configuration for Ultra320 SCSI devices.
■
Refer to your system documentation and the storage device installation manual
for specific cabling instructions.
▼
To Connect SCSI Cable(s) From the Host
Adapter to the Storage Device(s)
1. Connect the host adapter to the storage device(s) using the appropriate cable(s).
Refer to Table 1-1 for SCSI interface connection information.
TABLE 1-1
Sun StorEdge PCI/PCI-X Dual Ultra320 SCSI Host Adapter Interfaces
SCSI Interface
External Connector
Internal Connector
Channel A
J2
J6
Channel B
J3
J4