Sharp Aquos LC 20S4U - Manual (Page 12)

11
Part Names of Main Unit
Controls
A
• INPUT, CH (
)/( ), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
HEADPHONE jack
Plug the headphone mini-plug into the Headphone
jack located on the front of the main unit.
OPC (Optical Picture Control)
sensor
Remote sensor
OPC indicator (Optical Picture Control)
The OPC indicator lights up green when “OPC” is
set to “ON”. (See page 21.)
POWER/WAKE UP TIMER indicator
The POWER/WAKE UP TIMER indicator lights up green when the
power is on, and red when in the standby mode (the indicator will
not light when the main power is off), and orange when the wake-
up timer is set (the indicator will light when in the standby mode).
To change the vertical angle of the LCD TV
set, tilt the screen up to 2.5 degrees forward
or 10 degrees backward. The LCD TV set can
also be rotated up to 25 degrees to right and
left. Please adjust the angle so that the LCD
TV set can be watched most comfortably.
POWER
Upper control panel
INPUT
MENU
CH (Channel) ( )/( )
VOL (Volume)
(–)/(+)
Speaker
Tilt the display by grabbing onto the
carrying handle while securely holding
down the stand with your other hand.
How to adjust the angle
Listening with Headphones
■ Plug the headphone mini-plug into the HEADPHONE jack located on the front of the main unit.
A
• Headphones are not included in the supplied accessories.
• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the HEADPHONE jack.
• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
▼ On-screen display
20
VOLUME
Adjust the sound volume
using VOL (
+ ) / ( – ) on the
remote control.
Headphones
LC-20S4U_E_P09-13.p65 04.12.8, 6:16 PM 11