Sharp Aquos LC 20S4U - Manual (Page 18)

17
Turning On and Off the Main Power
POWER/WAKE UP TIMER indicator
POWER
Basic Operation
On-screen display
Switching the Input Modes (INPUT1/
INPUT2/INPUT3/TV)
Turn on the power of the connected video equipment.
Press INPUT to select the applicable input source. The
screen changes in order of INPUT1, INPUT2, INPUT3
and TV mode each time INPUT is pressed.
A
• INPUT1:
Used for video equipment connected to the COMPONENT input
terminals.
• INPUT2:
Used for video equipment connected to the INPUT2 input
terminals.
The S-video input terminal is additionally provided for the
INPUT2 terminal. If both the S-video terminal and normal
video terminals are connected with cables, the S-video input
terminal takes priority.
• INPUT3:
INPUT3 mode is used to adjust the preset settings and IN or
OUT can be selected. INPUT3 indication is not displayed
when OUT is selected. (For details on setting INPUT3
SELECT, see page 25.)
1
2
INPUT 2 mode
I N P U T 2
I N P U T 3
I N P U T 1
4 8 0 P
INPUT 3 mode
INPUT 1 (COMPONENT) mode
TV mode
2
● Press POWER. The POWER/WAKE UP TIMER indicator
instantly changes from red to green and the LCD TV set
is turned on.
A
• The On-screen display disappears after a few seconds.
● To turn off the main power, press POWER again.
Standby
To turn off the LCD TV set
Press POWER. The POWER/WAKE UP TIMER indicator will
turn red.
To turn the LCD TV set back on
Press POWER again. The POWER/WAKE UP TIMER
indicator will turn green.
S T E R E O
S A P
M O N O
M O N O 1 1 : 5 3 A M
2
LC-20S4U_E_P14-20.p65 04.12.8, 6:26 PM 17