SMC Networks SMC8002CM-US - Manual (Page 11)

Quick Installation Guide
8
Product Specifications
General Specifications
Standards Conformance DOCSIS 1.0, IEEE 802. 3, IEEE 802.3u, USB 1.1
Cable Modem Requirements
Modulation Downstream: 64-QAM/256-QAM (receive)
Upstream: QPSK/16-QAM (transmit)
Data Rate Downstream: 30.432 Mbps (64-QAM), 42.88 Mbps
(256-QAM)
Upstream: 320, 640, 1280, 2560, 5120 kbps (QPSK),
640, 1280, 5560, 5120, 10240 kbps (16-QAM)
Frequency Range Downstream: 91 MHz ~ 857 MHz
Upstream:5 MHz ~ 42 MHz
Bandwidth Downstream: 6 MHz
Upstream: 200 kHz, 400 kHz, 800 kHz, 1.6 MHz,
3.2 MHz
Input Signal Single Channel: -15 dBmv ~ +15 dBmv
Total: < +30 dBmv
Output Signal +8 dBmv ~ +58 dBmv (QPSK)
+8 dBmv ~ +55 dBmv (16-QAM)
Media Connection USB cable connection to PC: 90-ohm shielded USB
cable, max length 5 m (16 ft)
Ethernet 10BASE-T: Cat 3, 4, or 5 UTP cable
F-type female 75-ohm connector to CMTS provider
PC Requirements
Host Interface USB Specification 1.1 or up
System Requirements USB: Windows 98, 98 Second Edition, Windows Me or
Windows 2000
Ethernet: Windows 95 or higher,
Windows NT 4.0 or higher
Physical Characteristics
Ports 1 USB Type-B USB spec. 1.1 (modem to PC)
1 RJ-45 10BASE-T Ethernet (modem to PC, or to
Ethernet, hub/switch)
1 F-type female 75-ohm connector (to CMTS provider)
LEDs Power, LINK, ACT, STS
Dimensions 220 x 183 x 55 cm (8.66 x 7.20 x 2.16 in.)
Weight 700 g (24.69 oz.)
Input Power 110 V, 60 Hz
Power Consumption 12 Watts maximum
Environmental
Temperature - 40 ~ 45 ° C/ -40 ~ 113 ° F
Humidity 10- 95% (noncondensing)
Certification
Immunity EN 61000-4-2/3/4/5/6/8/11
Emissions FCC Class B, CISPR Class B, EN 61000-3-2/3
Safety UL, CB