Sharp TL-M4600 - Manual (Page 49)

47
Appendix
Specifications
n Product specifications
Model
Item
TL-M500 TL-M4600
LCD Panel ASV low-reflection black TFT LCD
Screen size 5  /
3
” (3 mm measured diagonally) 45 63 /
64
” (68 mm measured diagonally)
Active View Size
Wide x High
45 3 /
64
” x 5 33 /
64
” (5 mm x 648 mm) 40 3 /
3
” x  9 /
6
” (08 mm x 573 mm)
Number of pixels ,073,600 pixels (90 x 080)
Pixel pitch 0.600 mm (H) x 0.600 mm (V) 0.530 mm (H) x 0.530 mm (V)
Brightness 450 cd/m  400 cd/m 
Maximum colors 6.77 Million colors (8 bits/color)
Viewing angle Horizontal 76°/Vertical 76° (contrast ratio ≥ 0)
Backlight life (Approx.) 60,000 Hours * (at Backlight Standard position)
Audio amplifier 5 W x 5 W (4 Ω)
Terminals Rear Computer input 
Audio input Mini D-sub 5-pin (RGB/Component *3 )
Ø3.5 mm stereo minijack
Computer input 
Audio input 5BNC * (RGB/Component *3 )
Ø3.5 mm stereo minijack
Monitor output
Audio output Mini D-sub 5-pin (RGB/Component *3 )
Ø3.5 mm stereo minijack
Speaker output LR push terminal type
LAN RJ-45 8-pin modular
RS-3C D-sub 9-pin
DVI-D *4
Audio input
4-pin (Compatible with HDCP)
Ø3.5 mm stereo minijack
HDMI input 9-pin (Compatible with HDCP)
Side S-Video input
Video input
Audio input Mini Din 4-pin
RCA
RCA
OSD language English/French/Spanish/Italian/German/Dutch/Japanese
External control LAN, RS-3C
Power Requirement AC 00-40 V, 50/60 Hz
Power Consumption 3 W, 3. A 78 W, .8 A
Standby Power Consumption TL-M500: 33 W (Mode), .4 W (Mode), 0.3 W (Mode3) at AC 0 V
TL-M4600: 30 W (Mode), .4 W (Mode), 0.3 W (Mode3) at AC 0 V
Weight 6.8 lbs./8.0 kg (without Setup Stand) 48.5 lbs./.0 kg (without Setup Stand)
Dimension (W x H x D)
(without Setup Stand) 48 6 /
64
” x 8 43 /
64
” x 3 63 /
64
”
(43 mm x 78 mm x 0 mm)
43 43 /
64
” x 5 9 /
3
” x 4  /
64
”
(09 mm x 650 mm x 06 mm)
Operating Temperature 3°F - 04°F (0°C - 40°C)
Operating Humidity 30% - 80% (no condensation)
* The typical period of time after which the backlight power output will have decreased by about half, given
that the monitor is used continuously at 77°F (5°C) under standard lighting and brightness conditions.
* Plug-and-play is not supported.
*3 Cannot be used simultaneously.
*4 Connection is only allowed with an HDCP-compatible device.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some deviations from these values in
individual units.