Sanyo DS31810 - Manual (Page 12)

12
CONNECTING EXTERNAL EQUIPMENT
FOR PIP OPERATION
The PIP feature requires two signals to work: You must connect signals to the 75 ohm
terminal and to one set of the A/V jacks; or you must connect signals to both sets of A/V jacks.
CONNECTING A CABLE BOX AND VCR OR OTHER EXTERNAL
EQUIPMENT TO THE TV
Switch off TV and external equipment before connecting cables. (Cables and splitter
are not supplied.)
1. Connect signal (cable) to splitter
❶
.
2. Connect cable from splitter
❷
to the TV 75 Ω (ohm) terminal
❷
.
3. Connect cable from splitter
❸
to cable box
❸
.
4. Connect cable from cable box out
❹
to VCR Antenna In terminal
❹
.
5. Connect DVD, VCR, DSS, or other equipment’s Audio Out (R/L) and Video Out to the TV
Audio Input (R/L) and Video Input
❺
.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
Note: Use either A/ V1 or A/ V2 Input jacks.
Optional
6. Connect DVD, VCR, DSS, or other equipment’s S-Video Out to the TV S-Video In-1
Jack
❻
. Note: Using the S-Video In-1 jack overrides the Video1 Input jack
❻
.
7. Press POWER
❼
to turn on the TV . Turn on external equipment also.
8. Press the INPUT/TV•VCR key
❽
to select program source: TV signal or signal from the
equipment you have connected to the A/V1 and A/V2 jacks.
Follow the same procedure to connect other compatible video equipment to the second
set of A/V jacks.
QuickTips
■ Make sure all cable
connectors are fully
seated on jacks.
■ Always match cables
according to the
colors;
RED for right
audio, WHITE for left
audio and YELLOW for
video.
■ A / V1 and A / V2
jacks have identical
functions. Any
compatible video
equipment can be
connected to either
set of jacks.
■ A solid Blue screen
with the word Video1
or Video2 displayed
means that the Video
mode is selected, but
no signal is being
detected at the
Video jack. Check
connection, and
turn on external
equipment.
■ Make sure you select
TV channel to match
your VCR output
(Ch. 3 or 4).
■ You may be able to
use the remote control
to operate your VCR,
DVD, Satellite
Receiver,
and Cable Box.
(See pages 7 ~ 9.)
Need help?
Visit our website at
www.sanyoctv.com
or
UHF/VHF/CATV
75Ω
(MON0)
(MON0)
L
R
L
L
R
R
VIDEO
VIDEO
AUDIO
AUDIO
AUDIO
OUTPUT
S-VIDEO IN - 1 S-VIDEO IN - 2
AUDIO
VIDEO
INPUT
1
AUDIO
VIDEO
INPUT
2
FROM ANT.
OUT TO TV
R- -L AUDIO VIDEO
R- -L AUDIO VIDEO
A/V JACK
CH3 CH4
RF
CHANNEL
IN
OUT
IN
OUT
IN OUT
❸
Back View
of a VCR
❹
❺
❷
➊
DVD
AUX
TV VCR
❽
Remote Control
❻
❼
Splitter
Cable Box
TV A/V Input
Rear Jacks
DVD Player