Samsung 26-446 - Manual (Page 2)

2
USING THE GAMEPAD
Cautions:
• Always turn off your computer before con-
necting or disconnecting the gamepad
from the game port.
• When disconnecting the gamepad from
the computer, hold and gently pull on the
connector plug. Do not pull the cable.
Your gamepad has two triggers ( A and B ) and
six buttons ( R1 , R2 , T1 , T2 , C , and D ). It also
has two turbo/auto firing control switches
(marked
A and B ) which correspond to the A
and B triggers, and four turbo control switches
(marked R1/R2 , C , D , and T1/T2 ) which corre-
spond to the buttons of the same name.
Notes:
• If you are playing a 2-player game and
you get unexpected results when you
press your gamepad’s buttons, try setting
the
C , D , T1/T2 , and R1/R2 switches to
OFF . Some 2-player games use these
controls for the second player.
• In many games, you can use the R1 and
R2 buttons for rudder control and the T1
and T2 buttons for throttle control.
Follow these steps to use the gamepad.
1. Turn off the computer.
2. Insert the gamepad’s connector into game
port A on your computer, then turn on the
computer.
3. For R1/R2 , T1/T2 , C , and D , set OFF/NOR-
MAL/TURBO to OFF (if your game does not
use the button), NORMAL (for normal fire),
or TURBO (for high or low-speed turbo fire
when you hold down the button).
For A and B , set AUTO/NORMAL/TURBO
to AUTO (for automatic fire), NORMAL (for
normal fire), or TURBO (for high or low-
speed turbo fire when you hold down the
button).
Notes:
• You can set the turbo speed by setting
the speed selector on the back of the
gamepad to
1 (high) or 2 (low). How-
ever, turbo speed works only with
games that support it. If your game
does not support turbo speed, set any
buttons you use in the game to
NOR-
MAL .
• Depending on the game you are play-
ing, auto fire and turbo fire might work
differently. Try each game with and with-
out them to determine what works best.
4. If you are using Windows 95 or 98, config-
ure the gamepad, calibrate the gamepad,
then load the game software according to
the game owner’s manual. See “Configur-
ing the Gamepad in Windows 95/98 (With-
out the Supplied Driver)” on Page 3 and
“Calibrating the Gamepad Using the Sup-
plied Driver” on Page 3).
5. Set the gamepad to the mode specified
for your game:
• To set the gamepad to analog mode,
set ANALOG/DIGITAL to ANALOG and
set THROTTLE/T1/T2 to THROTTLE .
• To set the gamepad to digital mode, set
ANALOG/DIGITAL to DIGITAL and set
THROTTLE/T1/T2 to T1/T2 .
6. Hold the gamepad in both hands.
• If the gamepad is set to analog mode,
press the R1 , R2 , C , or D buttons and
slide the THROTTLE control with your
right thumb, then press the B trigger
with your right index finger. Press the
joystick with your left thumb while
pressing the
A trigger with your left
index finger.
• If the gamepad is set to digital mode,
press the R1 , R2 , T1, T2 , C , or D buttons
with your right thumb and press the B
trigger with your right index finger.
Press the thumb-control pad with your
left thumb and press the
A trigger with
your left index finger.
AUTO
DIGITAL
ANALOG
C
NORMAL TURBO
TURBO NORMAL
R1/R2
OFF
T1/T2
THROTTLE
D T1/T2
C
R1
D
R2
T2
T1
A
THR OTT LE B
A B
R1/R2
C D T1/T2
26-446.fm Page 2 Friday, July 9, 1999 9:45 AM