Sanyo CCA-BC200 - Manual (Page 8)

7
REAR VIEW BACK UP CAMERA
SYSTEM OUTLINE
Display mode
Including the standard rear view image captured by
the camera, a digitally corrected rear view,
view-from-top, and standard rear view can be
selected. Guide lines are indicated in order to assist
the driver and assure safety when backing up.
View-from-top height alignment
The view-from-top height can be set by alignment of the
virtual camera. (For alignment process, refer to Step 3
on page 20.)
Offset Calibration
If the camera is not installed in the center rear of the
vehicle, the offset can be corrected using the alignment
function.
View-from-top
(Corrected center)
Standard view
(Deviated center)
Virtual camera
Camera
View-from-top
Standard rear view
Standard rear view Digitally corrected rear view
Left/right guide lines (Green)
(Guide lines to indicate
width of vehicle)
6 ft. guide line (Light blue)
3 ft. guide line (Yellow)
1.5 ft. guide line (Red)
View-from-top
Need help? Call
1-800-421-5013
Virtual camera 1
Virtual camera 2
Camera
View-from-top
(Virtual camera 1)
View-from-top
(Virtual camera 2)