Sony IT-M804 - Manual (Page 45)

Telephone Features
45 US Telephone Features
When the Phone Directory security mode is set to ON:
When Jog Dial is turned or the dialing key is pressed,
“SECURITY=????” is displayed.
Enter the four digits security code which you have stored in
step 4 on page 46 by pressing the dialing keys.
When the security code is correct, “OK” is displayed.
Perform this step again. If the security code is not correct,
“SECURITY=????” is displayed. Enter the correct security
code.
3
Pick up the handset, press (SPEAKERPHONE) or press Jog
Button.
The phone number will be dialed.
Notes
• Once the phone returns to idle status with the Phone Directory security mode
ON setting, you must enter the security code when searching for or changing
a phone number in the Phone Directory or when making calls from the Phone
Directory.
• After displaying the phone number in step 2, perform step 3 within 20
seconds.
Tip
You can search the Phone Directory memory even while receiving calls. When
you want to make a call from the Phone Directory memory while receiving a
call, either press Jog Button, or press a line button that is not being used in step
3.
About the search order
The names appear in the following order when you turn Jog Dial up or
down.
• Alphabetical order:
ABC...XYZ y & y ’ y , y - y . y * y # y 0 - 9 y (space)
• Initial character: To search for “SONY” for example, press (7) and
then turn Jog Dial to search through the names starting with P, Q, R,
S or 7.
continued
t t