Siemens 30ISDN - Manual (Page 50)

Important information for installation and operation
42
kap01.fm5 27.11.98 Profiset 30isdn engl.: A30853-X300-B107-1-7619
ISDN supplementary services
Your Profiset 30isdn supports a lot of ISDN services, e.g.
toggle, park or conference.
The selection of services available depends on your
network operator and the selected tariff group (basic or
enhanced connection).
Contact your network operator for information on the
services available.
Technical data
Default settings
The Profiset 30isdn is delivered by the manufacturer with the following settings:
Power consumption: Power supply by NTBA.
Permitted environmental conditions
for operation:
+ 5 °C to + 40 °C
20 % to 85 % relative air humidity
Signalling method: ISDN DSS1
Dimensions(L x W x H): 170 x 210 x 92 mm
Weight: 590 g
Length of connecting cord: Telephone connecting cord approx. 3 m
Connecting plug: Mini western RJ45
● National variant: Germany (49)
● MSN: not set
● Call processing type: point-to-multipoint
● Trunk code: not set
● Memories (Destination dialling, speed
dialling, number redial, call list,direct station
selection number, call number for call for-
warding): empty
● Call forwarding: OFF
● Connection code for park/resume: 00
● Call waiting: permitted
● Calling line identification presentation (CLIP):
permitted
● Locking function: OFF
● Display of charge/call time of active call: ON
● Display of charge/call time of last call: ON
● Tariff unit factor: 0,00
● Summation meter: empty
● Password: 0000
● Ringer volume: 2
● Ringer melody: MSN1: 1; MSN2: 2; MSN3:3
● Handset volume: 3
● Restricted powering switch: in OFF position
(not entitled for operation in restricted pow-
ering condition)