Samsung DVD-P181 - Manual (Page 15)

ENG- 15
Connections
C
O N N E C T I O N S
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 47 to 48)
- The position of jacks may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using a Coaxial cable (not included), connect the DIGIT AL
AUDIO OUT (COAXIAL) jack on the rear of the DVD player to
the DIGIT AL AUDIO IN (COAXIAL) jack of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO or
COMPONENT jacks on the rear of the DVD player to the
VIDEO or COMPONENT jacks of your
TV as described on
pages 12 to 14.
3
T urn on your DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select the audio
input your DVD player is connected to in order to hear sound.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
KABEL Coaxial
tidak disediakan
DVD_P181_XAA1.1 2/12/08 8:25 PM Page 15