Samsung DVD-P181 - Manual (Page 47)

ENG-47
Changing
Setup Menu
The following describes each option found in the
Display Setup Menu.
❶ TV Aspect
Depending on a type of television you have,
you may want to adjust the screen setting
(aspect ratio).
- 4:3 Letter Box : Select when you want to
see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a
4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
- 4:3 Pan&Scan : Select this for conventional
size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and
right side of movie picture will be cut off.)
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.
❷ Screen Messages
Use to turn on-screen messages On or Off.
❸ Black Level
Adjust the brightness of the screen. (On or
Off) It does not function in Progressive
mode.
❹ Video Output
Select Video Output.
- I-SCAN : Select when you want to use
Component Interlace (480i) Out.
- P-SCAN : Select when you want to use
Component Progressive (480p) Out.
• If the Yes/No selection in the Display
Setup sub Menu is not made within 10
seconds, the screen returns to the
previous menu.
4:3 Pan&Scan
4:3 letter Box
16:9 Wide
.. Display Setup Page ..
Tv Aspect PS
Screen Message On
Video Output
I-Scan
Black Level Off
TV System PAl
C H A N G I N G S E T U P M E N U
• Consult your TV User’s Manual to find
out if your TV supports Progressive
Scan. If Progressive Scan is supported,
follow the TV User’s Manual regarding
Progressive Scan settings in the TV’s
menu system.
• If Video Output is set incorrectly, the
screen may be blocked.
I-Scan
P-SCAN
. . Display Setup Page ..
Tv Aspek PS
Screen Message On
Video Output I-Scan
Black Level Off
Sistem TV PAl
DVD_P181_XAA2.1 2/12/08 5:54 PM Page 47