Using the enhancer, Operating the c com 16, English – Samson C com 16 User Manual

Page 14: Using the key ext i/o insert jack

Advertising
background image

ENGLISH

USING THE ENHANCER

ENHANCER

The C Com 16’s ENHANCER switch can be engaged to activate the EFR (Enhanced Frequency Recovery) circuit.
By engaging the ENHANCER, the C Com 16 EFR restores the high frequency content that can be lost when high
gain reduction is applied. The C Com 16 EFR achieves this by adding back the high-end of the original signal in
an amount that is equal to the amount of gain reduction.

•

Follow the section above, “SETTING UP THE C Com 16” for
normalizing the controls and run a signal such as a CD
through the C Com 16.

•

Set the PROGRAM switch to 13; STEREO COMP.

•

Press the BYPASS switch to the IN position so that the green
LED is on.

•

Turn up the SENSITIVITY control until you reach 12 to 24 dB of gain reduction.

•

Engage the ENHANCER switch and listen to how the high end is restored.

12

USING THE KEY EXT I/O INSERT JACK

KEY INSERT

The C com 16 features a KEY insert jack which allows you to externally control the
compressors trigger signal. Using the KEY insert jack, you can patch in an external
processor to affect the compressors trigger. A typical application for external process-
ing of the KEY signal is inserting a graphic equalizer to filter. The KEY insert jack is
internally wired so the TIP is the KEY SEND and the RING is the KEY RETURN.

RIGHT

+4

-10

Operating The C Com 16

14

13

13

14

Advertising