Basic set-up & connections, 4quicktips, Positioning the tv – Sanyo DS13330 User Manual

Page 4

Advertising
background image

BASIC SET-UP & CONNECTIONS

4

QuickTips

The TV will automati-
cally select the correct
Antenna mode for the
type of signal you
connect.

TV will switch off
automatically after 15
minutes if there is no
signal reception (cable
out or station not
broadcasting).

Exception—When the

Video mode is selected,
the TV will not automati-
cally switch off when
signal reception has
stopped for 15 minutes.

See page 6 for Remote
control operation.

If you move the TV to a
new location, press the
RESET key twice after
connecting the signal,
and turning on the TV.

Need help?

Visit our Web site at

www.sanyoctv.com

or Call 1-800-877-5032

UHF/VHF/CATV
75

IN FROM

SAT.

CATV IN

OUT TO TV

S-VIDEO

CH3
CH4

L-

-R

AUDIO

VIDEO

L-

-R

AUDIO

VIDEO

FROM ANT.

OUT TO TV

IN

OUT

CONNECTING CABLE SERVICE, OUTDOOR OR INDOOR ANTENNA,
OR SATELLITE DISH RECEIVER TO TV

TV Back

Cable
Service

Outdoor
Antenna

Indoor
Antenna

Satellite Receiver

TV Back

POSITIONING THE TV

AS

Do not position the TV in a con-
fined area. Allow space for normal
air circulation around electronic
parts.

CATV FRANCHISE NOTE:
Cable companies, like public
utilities, are franchised by
local government authorities.
To receive cable programs,
even with equipment which
is capable of receiving cable
channels, the consumer
must subscribe to the cable
company’s service.

INITIAL SET-UP

1. Install batteries in remote control, see page 6.
2. Connect signal, see below.
3. Plug in AC power cord.
4. Press POWER key to turn on TV.
5. Follow on-screen instructions.

VCR Back

Note: If you do not have a
VCR connect signal directly
to TV 75 ohm jack.

Advertising
This manual is related to the following products: