Sanyo DS13330 - Manual (Page 6)

6
INSTALL BAT TERIES AS SHOWN
(2 AAA, not included)
Notes:
– Do not mix old batteries with new ones or mix different
types of batteries together.
– Remove the batteries if the remote control will not
be used for a month or more. Weak batteries may leak
and cause damage. (Normal battery life is roughly six
months.)
USING THE REMOTE CONTROL
QuickTips
■ Be sure batteries are
installed correctly.
■ Point the remote
control toward the TV.
Objects between the
remote control and the
TV may cause mis-
operation of the remote
control function.
■
The “C” in front of the
number on your screen
indicates a cable
channel.
■ Adjusting the volume
level: Flashing Right
arrow indicates volume
is increasing and
Flashing Left
arrow
indicates volume is
decreasing.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
MENU
MUTE
SLEEP
V-GUIDE
DISPLAY
CAPTION
RECALL
RESET INPUT
CH
POWER
VOL VOL
1 2 3
4 5 6
7 8 9
0
4 5 6
7 8 9
0
1 2 3
➀
➁
➂
➃
➀
Input Key—Press to select the
program source to watch: TV signal
or signal from DVD or other equip-
ment you have connected to the A/V
jacks.
➁
Menu Key—Use this key with the
▲/▼ and – /+ keys to navigate and
adjust features of the on-screen menu
system (see pages 7 ~ 8).
➂
Channel Scanning (CH ▲/▼ )
and Volume (VOL – /+) Keys
Press to scan through the channels
in memory and to adjust the volume.
➃
Mute Key—Press once to turn down
the volume. Press again to restore
volume to previous level.
➄
Number Keys—Two keys must be
pressed to select a channel. Example:
Press 0 then 6 to select channel 6. For
cable channels 100 through 125, press
and hold the 1 key until C1–– appears.
Then press the other two numbers.
➅
Caption Key (See page 8.)
➆
V-Guide Key (See pages 9 ~ 10.)
➇
Reset Key—Press this key twice to
restore factory settings. The TV will
automatically start Channel Search
and clear all customized settings.
These features will automatically
reset:
• Picture Adjustments:Color, Sharp-
ness, Bright, Contrast, and Tint
• Channel Memory
• Caption to OFF
• V-Guide to OFF
• Language to English
• Sleep Timer (if previously set)
• Game / Video to TV (if previously
set)
If desired, personal settings can be
made again using the menu options.
➈
Power Key—Press to turn TV on or
off.
➉
Recall Key—Select a channel; select
another channel using the number
keys. Press RECALL to switch
between the channels.
Display Key—Press once to display
the Channel number. Press twice to
display the channel number continu-
ously. Press again to remove the
display.
Sleep Key—Press this key then
press the “0” key to set the Sleep
Timer. The desired time can be set
from 30 minutes up to 3 hours. Sleep
Timer will switch off the TV auto-
matically. Note: The Sleep Timer
cancels when the TV is turned off or
if a power failure occurs.
IMPORTANT NOTE: Spent or discharged bat-
teries must be recycled or disposed of
properly in compliance with all applicable
laws. For detailed information, contact your
local County Solid Waste Authority.
REMOTE CONTROL KEYS
➠
Point towards TV
11
12
➄
➆
➅
➈
➉
➇
11
12