Sprint Nextel Digital Voice DVP 403 - Manual (Page 14)

Chapter 3: Chapter 3: Chapter 3: Chapter 3: Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running
10 10 10 10 – – – – ◆ ◆ ◆ ◆ – – – – Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Issue 1.6 Issue 1.6 Issue 1.6 Issue 1.6
STEP STEP STEP STEP 4 4 4 4
Install Sprint Digital Install Sprint Digital Install Sprint Digital Install Sprint Digital
Voice Voice Voice Voice
To install Sprint ® Digital Voice:
1. Mount Sprint Digital Voice on a wall, using the screw slots located
on the bottom of the cabinet. Use the enclosed template as a
guide when wall mounting. Make sure that the ventilation slots are
not blocked. Position the cabinet so that the LEDs are not blocked
from view.
OR OR OR OR
Place Sprint Digital Voice on any sturdy flat surface.
2. Plug Sprint Digital Voice power supply cord into the connector
labeled “24 VAC.” Place the adapter box into a 120V, 60 Hz
grounded outlet. See Figure 3.
Tools Need for Wall-Mounting
Onto Plywood
Drill
1 / 8 in. Bit
Phillips screwdriver
Onto Drywall
Drill
1 / 4 in. bit
Hammer
Phillips screwdriver
24 VAC
0.7A 50-60Hz
IOIOI
NVM2exVB-C1
Port 2 Port 4 Port 1 Port 3
AC Adapter
AC Power Cord
Figure 3: Installing Sprint Digital Voice