Sony CDX-V7800X - Manual (Page 10)

10
CD
The operating procedure of Video CDs/Super
VCDs is different from that of CDs. For details,
refer to page 13 (Video CD/Super VCD).
Listening to a CD
1
Press (OPEN) and insert the disc.
2
Close the front panel.
Playback starts automatically.
If a disc is already inserted, press (SOURCE)
repeatedly until “CD” appears to start
playback.
When the last track on the disc is
over
The track number indication returns to “1,”
and playback restarts from the first track of the
disc.
Elapsed playing time Track number
Changing the display item
Each time you press (DSPL) during playback,
the item changes as follows:
Track number/Elapsed playback time
Y
Disc type/Clock
The display will automatically change to the
Motion Display mode after a few seconds.
In the Motion Display mode, all the items are
scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See
“Changing the sound and display settings” on
page 22.)
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) momentarily for each track
you want to skip.
SOURCE
Locating a specific point in a track
— Manual Search
During playback, press and hold either
side of (SEEK/AMS). Release when you
have found the desired point.
SOURCE
Note
If “
” or “ ” appears in the
display, you have reached the beginning or the
end of the disc and you cannot go any further.
Z
Labelled side up
Disc indication Disc type
To
Pause playback and
resume play after pause
Stop playback
Eject the disc
Press
(4) (PAUSE)
(OFF)
(OPEN) then Z
To locate
preceding
tracks To locate
succeeding
tracks
To search
forward To search
backward