Sony DAV-HDX500 - Manual (Page 91)

Ad
v
a
nce
d
Se
ttings
an
d Adju
stme
nts
masterpage:Right
specdef v20061206
filename[E:\SS2007\Models\DC5\2895962131\2895962131DAVHDX500-501W\gb11adv.fm]
model name [DAV-HDX500/HDX501W]
[2-895-962-13(1)]
91 US
Note
• This function is available only when you set [HDMI
CONTROL] to [ON].
x [PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
Selects the picture in pause mode.
x [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
Note
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 88). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off.
x [AUDIO DRC] (DVD VIDEO only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.
x [AUDIO (HDMI)]
Selects the audio output status from the HDMI
OUT jack.
Note
• When you connect the unit and TV with the HDMI
cord and [ON] is selected, AUDIO DRC, A/V SYNC,
DYNAMIC BASS, MOVIE/MUSIC, and sound field
are not applied to the sound that is output from the
TV.
[ON] Sets the STB SYNCHRO function
to on.
[AUTO] The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
[FRAME] The picture, including subjects
that do not move dynamically, is
output in high resolution.
[OFF] No priority given.
[AUTO] Priority given.
[ON] Stores the resume settings in
memory for up to 40 discs.
[OFF] Does not store the resume settings
in memory. Playback restarts at
the resume point only for the
current disc in the unit.
[OFF] No compression of dynamic
range.
[STANDARD] Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
[MAX] Compresses dynamic range fully.
[OFF] The sound is not output from the
HDMI OUT jack.
[ON] Outputs audio signals by
converting Dolby Digital, DTS, or
96 kHz/24 bit PCM signals to 48
kHz/ 16 bit PCM.