Sony DAV-HDX500 - Manual (Page 68)

masterpage:Left
specdef v20061206
filename[E:\SS2007\Models\DC5\2895962131\2895962131DAVHDX500-501W\gb09rad.fm]
model name [DAV-HDX500/HDX501W]
[2-895-962-13(1)]
68 US
To Activate XM Satellite Radio
Once you have installed the XM Mini-Tuner
Dock, inserted the XM Mni-Tuner, connected
the XM Dock to your XM Ready
®
home audio
system, and installed the antenna, you are ready
to subscribe and begin receiving XM
programming. There are three places to find
your eight character XM Radio ID: on the XM
Mini-Tuner, on the XM Mini-Tuner package,
and on XM Channel 0. Record the Radio ID in
the following eight squares for reference.
ssssssss
Note: The XM Radio ID does not use the letters
“I,” “O,” “S,” or “F.” Activate your XM Satellite
Radio service in the U.S. online at http://
activate.xmradio.com or call 1-800-XM-
RADIO (1-800-967-2346). You will need a
major credit card. XM will send a signal from
the satellites to activate the full channel lineup.
Activation normally takes 10 to 15 minutes, but
during peak busy periods you may need to keep
your XM Ready home audio system on for up to
an hour. When you can access the full channel
lineup on your XM Ready home audio system
you are done. For more information or to
subscribe in Canada, visit XM on the Web at
www.xmradio.ca or call XM’s Listener Care at
1-877-GET-XMSR (1-877-438-9677)
Connecting the XM Radio
Before operating the system, connect the XM
Connect-and-Play antenna to the XM jack.
Note
• To ensure optimal reception of XM’s satellite signal,
move your antenna to various window locations
around your home to see where the best reception will
be received. Most XM customers place the antenna in
a south-facing window with a clear view to the sky.
Checking the XM Radio ID
1
Press FUNCTION repeatedly until “XM”
appears in the front panel display.
2
Press D.TUNING.
3
Press 0, and then to select channel
0.
4
Check the XM Radio ID in the front
panel display.
Receiving XM Radio
broadcasts
Before tuning, make sure to turn down the
volume to minimum.
1
Press FUNCTION repeatedly until “XM”
appears in the front panel display.
2
Press TUNING + or – to select a
channel.
For slow tuning, press TUNING + or –
briefly.
For fast tuning, press and hold TUNING +
or –.
3
Adjust the volume by pressing
VOLUME +/–.
Selecting channels from a
category (Category Tuning)
You can select a channel from one category or
all the categories by changing the category
mode.
1
Press CATEGORY MODE repeatedly to
select “ONE CAT.”
• “ALL CAT” : You can select a channel
from all the categories. The initial setting
is “ALL CAT.”
MONITOR OUT
SAT/CABLE
TV COMPONENT VIDEO OUT
COMPONENT VIDEO IN R L AUDIO IN VIDEO IN
R L AUDIO IN
Y P B /C B P R /C R
Y P B /C B P R /C R
VIDEO
(DVD ONLY)
S VIDEO
XM
OPTICAL
ANTENNA
COAXIAL
AM
FM
75
DMPORT1 DMPORT2
XM Jack