Samsung MCC8 - Manual (Page 27)

C HAPTER 4: T WO -T IER C ONFIGURATION 17
Figure 25 Edit Names and Scan Rate Menu (Second-Tier MCC8)
3. Use the <Tab>, <Shift-Tab> or <Ç>/<È> keys to move the cursor to the line you want to edit.
Use < Å>/<Æ> to move within a line.
Note: Because you have specified a two-tier configuration, use the <Page
Up>/<Page Down> keys to view the next or previous group of up to eight
channels.
a. To change the Name of a second tier MasterConsole Device in the base unit channel list:
Type up to seven alphanumeric characters (no spaces). The "/" (backslash) first
character cannot be changed.
b. To change the Name of any computer connected to either the base unit or second-tier
MasterConsole, type up to eight alphanumeric characters (no spaces).
c. To change the Channel-Specific scan Rate for any highlighted channel (default is 3
seconds): Type a number from 00 to 99 (in seconds). When the AutoScan Mode in the
Configuration Menu is set to Individual, these Channel-Specific Scan Rates are enabled.
If the AutoScan mode is set to Global, the global scan rate will be used.
4. When you move to a different page or exit this Menu, you are prompted to save your changes.
Press <Y> to save.
5. To exit the Edit Names and Scan Rate Menu: Press any Menu F key to go to another menu,
or press <Esc> to go to the Selection Menu.