Samsung MCC8 - Manual (Page 44)

34 M ASTER C ONSOLE II U SER M ANUAL
T ERM D EFINITION
On-Screen User
Interface (OSUI) Series of Menus displayed on the monitor that can be used, through
keystrokes, to operate MasterConsole II. All keystrokes are captured
and interpreted as MasterConsole II commands.
PowerSave Allows a properly equipped monitor to operate in low-energy mode.
Remote Console Keyboard, monitor, and mouse plugged into the Remote access kit.
Cat5 Remote KVM Module: Optional Remote Unit that connects to
the MasterConsole II to provide additional access to connected
computers up to 650' away using Cat5 UTP Cable.
Cat5 Remote KVM Port: The Keyboard, Monitor, and Mouse ports on
the back of the Cat5 Remote KVM Module unit.
Satellite Unit Second-tier MasterConsole II located more than 30 feet from the
base unit and connected through its Remote Access Kit.
Scan Front panel button and On-Screen User Interface function used to
activate AutoScan.
Scan Rate The duration (in seconds) a channel’s computer is to remain
displayed on the monitor when AutoScan is activated.
Global Scan Rate: Scan rate is the same for all computers, if the
Mode field in the Configuration Menu is set to Global.
Channel-Specific (Individual) Scan Rate:: Scan rate specified for each
computer during the Scan cycle, if the Mode field in the Configuration
Menu is set to Individual. Channel-specific scan rates can be set in
the Edit Names and Scan Rate Menu.
Security When activated, and the system remains idle for a period of time, the
next user must enter an authorized User Password to establish
access.
Selection Menu Used to select a computer.
Sorting Order of the channels listed in Selection Menu; either by Channel ID
or by Name.
Time Out the length of time that the system can remain idle (that is, since the
last keyboard/mouse or front panel operation) before the next user
must enter an authorized User Password to establish access.
User Password Enables access to the system after Time Out.