Sharp DV-RW550U - Manual (Page 92)

92
Changing the Setting menu
Audio setting (cont’d)
Playback
Parental Lock All
TV Aspect 4:3 Letter Box
Digital Out
Fast Forward with Audio ON
Progressive OFF
Disc Menu Language English
Audio Language Original
Subtitle Language OFF
Dynamic Range Control ON
DVD
Playback
Parental Lock All
TV Aspect 4:3 Letter Box
Digital Out
Disc Menu Language English
Audio Language Original
Subtitle Language OFF
Dynamic Range Control ON
Fast Forward with Audio ON
Progressive OFF
DVD
Dynamic Range Control
OFF
ON
DVD
Fast Forward with Audio
OFF
DVD
ON
• Select a setting using Cursor
K / L, then press ENTER.
Your setting will be activated.
• Select a setting using Cursor
K / L, then press ENTER.
Your setting will be activated.
Dynamic Range Control (Default : ON)
Set to “ON” to compress the range between soft and loud sounds.
Fast Forward with Audio (Default : ON)
Set to “ON” to output the sound during playback in x
1.5 fast forward.
5
Press SETUP to exit.
Settings for Dolby Digital (Default : Stream)
Digital Out - Dolby Digital
Stream
PCM
DVD
• Select a setting using Cursor K / L, then
press ENTER.
Your setting will be activated.
PCM : Convert the Dolby Digital into PCM
(2 channel).
When your amplifier/decoder is NOT com-
patible with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals.
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
Settings for PCM (Default : 48kHz)
Digital Out - PCM
96kHz
48kHz
DVD
• Select a setting using Cursor K / L, then
press ENTER.
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT com-
patible with 96kHz PCM, select “48kHz”.
96kHz sound will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible
with 96kHz PCM, select “96kHz”.
: 96kHz sound will be output.
B
A
Note
When playing back disc with
copyright protection
• Even if you select “96kHz”, the
sound will be down sampled at
48kHz.
Note
When playing back a DVD-RW
disc recorded in VR mode
• If the audio on a disc is record-
ed in Dolby Digital format, set
“Dolby Digital” to “PCM” so
that you can switch to main (L),
sub audio (R), or a mix of both
(L/R) with your
amplifier/decoder.
Settings for DTS (Default : OFF)
Digital Out - DTS
OFF
ON
DVD
• Select a setting using Cursor K / L, then press ENTER.
Your setting will be activated.
ON : Outputs DTS signals.
When your amplifier/decoder is compatible with DTS, set to “ON”.
OFF : No DTS signal is output.
When your amplifier/decoder is NOT compatible with DTS, set to
“OFF”.
C
5
E9656UD_EN_2.qx4 05.7.15 11:59 AM Page 92