Seiko 7B26 - Manual (Page 35)

English
English

English
English

*For the solution of troubles other than the above, consult the retailer from whom the watch was purchased.
Trouble Possible cause
The calendar is out of preliminary position.
This happens when the calendar is out of preliminary
position as a result of influence of various external
sources or after the built-in IC is reset.
The stored electric power is running short causing the
watch to move at two-second intervals or five-second
intervals.
Date numerals in the calendar window are moving right
after the various crown or button operations.
--------------
Small amount of water has got inside the watch due to
deterioration of the gasket, etc.
The reception result display
confirms successful reception
b u t t h e w r o n g d a t e i s
displayed.
The crown or buttons cannot
be operated.
I get lost in the middle of the
setting procedures.
Blur on the dial glass persists.
Wrong
date
Crown
and button
operation
Others
Trouble Possible cause Solution
After checking whether the calendar is set to the preliminary position, perform the preliminary
position settings for calendar.
For details, refer to “PRELIMINARY POSITION CHECKING AND SETTING FOR THE CALENDAR”
on pages 58-59.
Refer to “ENERGY DEPLETION FOREWARNING FUNCTION” on page 13 to charge the watch.
Wait until the date numerals in the calendar window stop.
After the date numerals stop, the crown and buttons can be operated.
Leave the watch untouched for a while. The watch will resume its normal movement.
Then start the setting procedure from the beginning.
Consult the retailer from whom the watch was purchased.