Seiko 7B26 - Manual (Page 7)

English
English
1
English
English
1
ENERGY DEPLETION FOREWARNING FUNCTION
The energy depletion forewarning function is activated when the energy stored in the watch runs
low. In such a case, the second hand moves at two-second intervals. If the watch continues
to be in the state of two-second interval movement, the watch switches to five-second interval
movement, followed by a completely stopped state.
If the energy depletion forewarning function is activated, charge the watch sufficiently.
HOW TO CHARGE THE WATCH…page 10
STANDARD CHARGING TIME…page 11
* Neither the buttons nor the crown can be operated while the second hand moves at two-second or five-
second intervals (this is not a malfunction).
* While the second hand moves at five-second intervals, the hour and minute hands and calendar stop
operating.
* While the second hand moves at five-second intervals, the watch is unable to receive radio signals
automatically. After the watch is charged sufficiently and the second hand returns to normal one-second
interval movement, conduct the manual reception of radio signals to set the watch to the correct time. After
completing the radio signal reception, when the date is incorrect even if the correct time is displayed, check
that the calendar is set to the preliminary position (refer to “RADIO SIGNAL RECEPTION” on page 20 and
“PRELIMINARY POSITION CHECKING AND SETTING FOR THE CALENDAR” on pages 58-59).
The second hand moves
at one-second intervals.
The second hand moves
at two-second intervals
The second hand moves
at five-second intervals.
The second hand
is stopped.
The watch is
sufficiently charged.
The power save
function is activated.
The watch completely
stops operating.
The energy depletion
forewarning function
is activated.
No need to charge
the watch yet.
Refer to “POWER SAVE
FUNCTION” on pages 14-15.
Refer to “ENERGY
DEPLETION FOREWARNING
FUNCTION” on page 13
to charge the watch sufficiently.
*1
*2
Energy having been stored in the watch
has been consumed due to reasons
such as leaving the watch in a dark
place for a long time. After charging the
watch sufficiently, conduct manual
reception to set the time.
CHECKING THE CHARGING STATUS BY THE MOVEMENT OF
THE SECOND HAND
*1. If the second hand is stopped even after the watch is sufficiently charged, refer to "TROUBLESHOOTING" on pages 64-65.
*2. After the watch receives a radio signal, when the date is incorrect even if the correct time is displayed,
check that the calendar is set to the preliminary position (refer to “PRELIMINARY POSITION CHECKING
AND SETTING FOR THE CALENDAR” on pages 58-59).