Sony 4-170-060-12(1) - Manual (Page 21)

21 GB
T
uner F
unct
ions
To turn off the radio
Press "/1 to turn off the stand.
To change to another function, press INPUT
SELECTOR +/–.
To listen to non-preset radio
stations
Use manual or automatic tuning in step 2.
For manual tuning, press TUNING +/–
repeatedly.
For automatic tuning, press and hold TUNING
+/–. The automatic tuning stops when the stand
tunes in a station. To stop the automatic tuning
while automatic tuning is in progress, press
TUNING +/–.
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1
Press MENU.
2
Press X/x repeatedly until “FM MODE”
appears in the front panel display, then press
or c.
3
Press X/x to select “MONO.”
• STEREO: Stereo reception.
• MONO: Monaural reception.
4
Press .
The setting is made.
5
Press MENU.
• To improve reception, reorient the FM wire antenna
(aerial) (supplied).
You can enter a name for preset stations. These
names (for example, “XYZ”) appear in the front
panel display when a station is selected.
Note that no more than one name can be entered
for each preset station.
• You cannot enter a name for a preset station for which
a Radio Data System (RDS) broadcast is received
(page 22).
1
Press INPUT SELECTOR +/– repeatedly
until “FM” appears in the front panel
display.
The last received station is tuned in.
2
Press PRESET +/– repeatedly to select
the preset station you want to create a
name for.
3
Press MENU.
4
Press X/x repeatedly until “NAME IN”
appears in the front panel display.
5
Press .
6
Create a name by using C / X/x/ c .
Press X/x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station name.
If you enter a wrong character
Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character.
7
Press .
“COMPLETE” appears in the front panel
display, and the station name is stored.
8
Press MENU.
• You can check the frequency in the front panel display
by pressing DISPLAY repeatedly.
Viewing the station name or
frequency in the front panel
display
When the stand is set to “FM,” you can check the
frequency using the front panel display.
Press DISPLAY.
Tip
Naming preset stations
Note
Tip
continued