Sony 3KD-32NX200U User Manual

Quick start guide, Digit al

Advertising
background image

1

GUIDE

0

4

6

7

8

9

1

2

3

5

DIGIT

AL

MEMORY STICK

MODE

INDEX

PROG

MENU

VIDEO

TV

/

/

VTR

TV

DVD

Quick Start Guide

4-090-228-01

Checking the supplied
accessories

Inserting batteries into
the remote control

Connecting the TV

2

Remote Control

Connecting an aerial only

Connecting an aerial and VCR

KD-32NX200U

Thank you for choosing this Sony
Trinitron Television.

This step by step guide will help you to:

Insert batteries into the remote control.

Connect the aerial to your TV.

Connect a video cassette recorder (VCR) to your TV.

Switch on your TV.

Tune your TV.

View TV programmes.

1

3

KD-36NX200U

Batteries

RF Loopthrough cable

3

2

Place a coin in the slot at the
bottom of the remote control.
Turn anti clockwise to release
the battery compartment.

Insert the batteries as
indicated in the battery
compartment.

Replace the battery compartment
and lock in place by twisting the
coin clockwise in the slot.

Always remember to dispose of batteries in an environmentally friendly way.

R/D/D/D

L/G/S/I

ANALOGUE

1

2

DVD

VCR

s

3

3

(SMARTLINK)

DIGITAL

OPTICAL OUTPUT

MODEM

. . . 5V 200mA

Existing
aerial lead

RF loopthrough
cable (supplied)

Scart lead
(not supplied)

RF lead
(not supplied)

1.

Connect your existing aerial lead to the digital socket marked

on the rear of

the TV as shown.

2.

Connect the supplied RF loopthrough cable from the socket marked

to the

analogue socket marked

.

1.

Connect your existing aerial lead to the digital socket marked

on the rear of the

TV as shown.

2.

Connect the supplied RF loopthrough cable from the lower socket marked

on

the TV to the RF IN socket on your VCR.

3.

Connect a lead from the RF OUT socket of your VCR to the analogue socket
marked

on the TV.

4.

Connect a scart lead from the socket marked

on the rear of the TV to

the scart socket on your VCR (refer to your VCR instruction manual).

5.

Connect the VCR to the mains socket and switch on.

6.

Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button. This enables
the TV to locate and store the video channel during the ‘Automatically tuning the
TV’ procedure.

s

3

3

VCR

Advertising
This manual is related to the following products: