Sony 4-106-868-11(1) - Manual (Page 4)

4 GB
Start-up Guide
Before Use
To check the accessories
Mains lead (1)
Remote RM-ED011 (1)
Size AA batteries (R6 type) (2)
Stand (1) and screws for stand (4)
(KDL-46W4500/KDL-40W4500 only)
To insert batteries into the remote
~
• Observe the correct polarity when inserting
batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
• Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.
1: Attaching the stand
(for KDL-46W4500/
KDL-40W4500)
1 Open the carton box and take out the stand
and the screws.
2 Place the TV set on the stand. Take care
not to interfere with cables.
3
Fix the TV to the stand according to the
arrow marks
that guide the screw holes
using the supplied screws.
~
If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
Push and lift the cover to open.