Sunbeam 696 - Manual (Page 4)

This product has a polarized plug (one blade is wider than the other). As a safety feature, this plug
‘will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
OPERATION
To Fill:
1. Remove water tank from base, and turn it upside down. Turn the filling cap counter-clockwise,
2. Fill the tank with clean, cool, tap water or distilled water and fasten the filling cap firmly.
Place the water tank back on the unit and allow a few minutes for the water to fill the
reservoir. Note: Water that is too cold may temporarily reduce the mist output. Too hot water can
damage the nebulizer (ultrasonic transducer).
3. The fan keeps operating when the water tank is empty. Turn the unit off before refilling
the water tank.
To Use:
1. Plug power cord into a 120V AC wall outlet oniy.
2. Switch the unit on by turning the power control. The power indicator will illuminate.
3. Adjust the mist intensity control to desired level.
4. Simply turn mist nozzle until the desired amount of mist is coming out.
5. Adjust mist nozzle away from wails and furniture.
It is important to leave the door of the room open when humidifier is being used
(see note about humidity).
MAINTENANCE/CARE
General lnformation
Always unplug the unit before cleaning.
Drain and clean before storing.
Clean after tong periods of storage.
Clean frequently during the heating season. (Every third day is recommended.)
Never immerse unit in water or let water enter the air outlet or any other openings.
Rinse water tank with lukewarm water after each use. To dry for storage, wipe with a soft clean cloth.
To Clean Water Tank:
If tank appears dirty, sanitize it by using a mild bleach and water solution, never detergent.
Rinse thoroughly to be sure bleach is entirely elimlnated before using.
Caution: If water sits in the tank for more than a day or two,
bacterial growth is possible.