Listening to the sound, Basic operations, Operating using the remote z – Sony SA-F11 User Manual

Page 6

Advertising
background image

Basic Operations

6

GB

TV

VIDEO

DVD

+

+

+

+

+

Listening to the Sound

1

Turn on the DVD player and insert the disc.

2

Press

1/u to turn on the subwoofer.

The indicator of the

1/u button changes from red

(standby mode) to green.

3

Press INPUT repeatedly until the DVD indicator
lights up.

4

Press MODE repeatedly until the MASTER
VOLUME indicator lights up in green, then press
and hold LEVEL – to set the volume level to
minimum.

5

Press

· on the DVD player to start playing.

Press LEVEL + or – to adjust the volume level.

z

You can adjust the volume selecting the tone level

Press MODE repeatedly until the sound level indicator
(SW VOL/BASS/TREBLE) you want to change lights
up, then press LEVEL + or – to adjust the volume of the
tone level you select.

z

You can reset the tone level to the factory setting

Press and while holding the LEVEL + and –, press

1/u.

z

The subwoofer turns on and off automatically
according to whether the audio signal is input or not
(Auto Power Function)

If no audio signal is input for three minutes, the
subwoofer switches to standby mode and the

1/u

indicator changes to red (Auto Power Off). When an
audio signal is input, the subwoofer turn on
automatically and the

1/u indicator changes to green

(Auto Power On).

Note

If you press the

1/u button while listening to the subwoofer,

the subwoofer switches to standby mode. Press the

1/u

button again to turn it on. If the button is not pressed again
within three minutes, the Auto Power On function activates
the subwoofer automatically.

Operating using the remote

Z

The table below shows the operations you can do by
using the remote.

To

Turn on/off the power

Adjust the volume

Select the component

Adjust the volume of each tone

LFE *

Bass

Treble

* Low Frequency Effect

Note

The tone level indicator of the subwoofer changes
automatically when you adjust the volume of each tone
using the remote.

z

You can change the woofer mode according to the
source

Press WOOFER MODE on the remote (or press LEVEL
+ and – on the subwoofer at the same time). When the
SW VOL indicator on the subwoofer lights up in green,
the mode changes to movie mode (factory setting).
When the indicator lights up in red, the mode changes
to music mode. You can listen to the most suitable
audio mix, depending on the source.

z

You can mute the sound

Press MUTING on the remote.
To restore the sound, press MASTER VOL + (or
MUTING on the remote again).

Press

1/u

MASTER VOL + or –

INPUT SELECT

S.WOOFER + or –

BASS + or –

TREBLE + or –

1/u

INPUT

MODE

LEVEL +/–

1/u

S.WOOFER +/–

TREBLE +/–

BASS +/–

MASTER VOL +/–

WOOFER MODE

MUTING

INPUT SELECT

Advertising