Skil 3100 - Manual (Page 10)

10.
15. Universal Insert Plate:
a. A blank insert plate is provided with the X-Bench. This area is
meant to be used only with the Skil insert plate technology which
is sold separately. The insert plates which can be purchased
separately are a jigsaw insert plate, sander insert plate, router
insert plate and a drill press insert plate.
Use only X-Bench inserts and dedicated
tools. Any others may cause loss of control and
personal injury.
Maintaining Your X-Bench
Maintenance
Certain cleaning agents and solvents can
damage plastic parts. Some of these are:
gasoline, carbon tetrachloride, chlorinated cleaning solvents,
ammonia and household detergents which contain ammonia.
Avoiding use of these and other types of cleaning agents will
minimize the possibility of damage.
All repairs, electrical or mechanical, should
be attempted only by trained repairmen.
Contact the nearest Factory Service Center or Authorized
Service Station or other competent repair service. Use only
identical replacement parts, any other may create a hazard.
CAUTION !
WARNING !
WARNING !
Fig. 28
Never place dogs on opposite sides of cut channel. Support must be on one side of table. WARNING !
Cutting Suggestions
2" x 10"
1" x 12"
1" x 4"
2" x 4"
1" x 6"
2" x 8"
1" x 10"
2" x 6"
1" x 8"
Wedge
Dog 1
Wedge
Dog 2