Sony TC-WE635 - Manual (Page 16)

Advanced Recording Operations
16
Inserting a Blank Space During
Recording (Record Muting)
You can insert a blank space of 4 seconds between the
tracks. The blank spaces allow you to locate the start of
specific tracks afterwards using the Multi-AMS
function (see page 8). You can also use this function to
erase unwanted portions on a tape.
PAUSE P
REC MUTING R
0
p
P
ª ·
)
U
§ §
R r P R r
0
p ª ·
)
•
1 Follow Steps 1 to 5 of “Recording on a Tape” on
pages 6 and 7.
Recording starts.
2
Press REC MUTING R where you want to insert a
blank space.
“REC” flashes in the display and a blank is
recorded on the tape.
After 4 seconds, P lights up and the tape deck
changes to recording pause.
3 Press PAUSE P to resume recording.
z
If you want to insert a blank space longer than 4
seconds
Hold down REC MUTING R as long as you want.
After 4 seconds, “REC” flashes faster.
When you release REC MUTING R, P lights up and the
tape deck changes to recording pause.
Press PAUSE P to resume recording.
Synchro-recording With a CD
Player Through a Control A1
Cord
By pressing the SYNCHRO button, you can perform
synchro-recording on your tape deck with a Sony CD
player connected to the CONTROL A1 connector
through a Control A1 cord (see page 4). The Control
A1 cord supports advanced functions not possible with
the commander-based CD synchro-recording function
on previous models. Further information on the
various operations made possible by a Control A1 cord
is provided in the pamphlet attached to this manual.
PAUSE P DIRECTION MODE SYNCHRO ª/·
0
p
P
ª ·
)
U
§ §
R r P R r
0
p ª ·
)
•
1
Set the source selector on the amplifier to CD
player.
2
Insert a CD into the CD player.
3
Select the play mode (CONTINUE, SHUFFLE, or
PROGRAM) of the CD player.
4
Insert a cassette into deck B.
5
Select the side(s) to be recorded on.
To record on Set DIRECTION MODE to
Only one side A
Both sides a or RELAY
6
Select the side you want to start recording from
on deck B.
To record from Press
The front side ·
The reverse side ª
7
Press SYNCHRO.
If your CD player has the Peak Search function
The SYNCHRO button indicator lights up and the CD
player locates the highest signal level among the tracks
to be recorded as the tape deck adjusts the recording
level. When the recording level adjustment is
completed, CD Synchro-recording starts.