English – Samson HyDrive HX410 User Manual

Page 8

Advertising
background image

4

ENGLISH

IMPORTANT: There is a minimum safe impedance so be sure to check the manu-

facturer’s recommended impedance for your amplifier to avoid any damage to your

amplifier or voiding your warranty.

Connecting the HX410 and HX115
to Your Amplifier

The HX410 and HX115 connections

are made via either the 1/4” phone

jacks or Speakon connectors located

on the rear panel jack-plate. Be sure

to make your connection with un-

shielded speaker cable. Connect the

Amplifier Output to the speaker Input

on the HX410’s or HX115’s rear jack-

plate.

Using the EXTENSION Output

The HX410 and HX115 provides

a convenient Extension Output

for connecting additional speaker

cabinets in parallel. Be sure to read

the section above on impedance to

insure a proper hook-up with your

amplifier. Follow the steps below to

connect two HX410 or HX115's using

the Extension Output. Connect the

Amplifier Output to the Input of the

first HX410 or HX115. Now, connect

the Extension Output to the Input of

the second cabinet.

Hartke Systems

Distributed Exclusively by

Samson Technologies Corp.

Hicksville, New York 11802

MODEL 2000

200 WATTS

8



= 120 WATTS

4



= 200 WATTS

CAUTION

TO PREVENT SHOCK, DO NOT OPEN. NO USER SERVICE-

ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE TO RAIN OR MOISTURE.

ASSEMBLED IN R.O.K.

SERIAL NUMBER

115

~ AC INPUT

115V/230V 50/60Hz

FUSE

5A/250V, 180W (115V)

2.5A/250V, 450W (230V)

SPEAKER OUTPUTS

8

8

ON

OFF

HPF

EFFECT

SEND

RETUIRN

8

Connecting the HX410 and HX115

Hartke Systems

Distributed Exclusively by

Samson Technologies Corp.

Hicksville, New York 11802

MODEL 2000

200 WATTS

8



= 120 WATTS

4



= 200 WATTS

CAUTION

TO PREVENT SHOCK, DO NOT OPEN. NO USER SERVICE-

ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE TO RAIN OR MOISTURE.

ASSEMBLED IN R.O.K.

SERIAL NUMBER

115

~ AC INPUT

115V/230V 50/60Hz

FUSE

5A/250V, 180W (115V)

2.5A/250V, 450W (230V)

SPEAKER OUTPUTS

8

8

ON

OFF

HPF

EFFECT

SEND

RETUIRN

8

Advertising
This manual is related to the following products: