Switching the phantom powering on/off - phanto, Selecting the standard display - disply, Entering a name - name – Sennheiser SKP 3000 User Manual

Page 22

Advertising
background image

54

Switching the phantom powering on/off – PHANTO

The plug-on transmitter can supply condenser microphones
without internal power supply with 48 V phantom powering
(P 48). The phantom powering can be switched on or off via the

PHANTO

” menu. Please note: Dynamic microphones can be

operated in phantom powering mode without harm. However, if
no condenser microphone module is being used, you should
switch off the phantom powering. With the phantom powering
switched on, the operating time of the batteries or the BA 2015
accupack will be reduced.

Selecting the standard display – DISPLY

Via the “

DISPLY

” menu, you can select the standard display:

Entering a name – NAME

Via the “

NAME

” menu, you can enter a freely selectable name

for the transmitter. The name can be displayed on the standard
display and can consist of up to six characters such as:

!

letters (without pronounciation marks),

!

numbers from 0 to 9,

!

special characters e. g. () - . _ and spaces.

To enter a name, proceed as follows:

̈

Press the

SET

button to get into the setting mode of the

NAME

” menu. The first segment starts flashing on the

display.

“FREQ”

“NAME”

“CHAN”

Advertising