Sennheiser SKP 3000 - Manual (Page 24)

56
Troubleshooting
Error checklist
Problem Possible cause Possible solution
No operation
indication Batteries are flat or
inserted incorrectly,
accupack is flat Replace the batteries or
check if they are
inserted correctly or
recharge the accupack
Receiver:
No RF signal Transmitter and
receiver are not on the
same channel Set transmitter and
receiver to the same
channel
Transmitter is out of
range Check the squelch
threshold setting or
reduce the distance
between transmitter
and receiving antenna
Receiver:
RF signal
available,
no audio
signal Transmitter is muted
(MUTE) Deactivate the muting
function
Receiver’s squelch
threshold is adjusted
too high Reduce the squelch
threshold
Audio signal
has a high
level of
background
noise Transmitter
sensitivity is adjusted
too low see “Adjusting the
sensitivity – SENSIT” on
page 53
Receiver’s AF output
level is adjusted too
low Increase the audio
output level