Saab 2007 9-3 - Manual (Page 109)

109 Instruments and controls
MAX heat (red indicator):
MAX heating is obtained when the tempera-
ture knob is turned to the first position past
26 (to the red LED).
The driver’s side selection controls air dist-
ribution and the recirculation status. The
temperature can be adjusted on the pas-
senger side.
MAX heating produces:
• Maximum heat.
• Air distribution to windscreen and floor.
• Recirculation OFF.
• High fan speed.
MAX cooling (blue indicator):
MAX cooling is obtained when the tempera-
ture knob is turned to the first position past
16 (to the blue LED).
The driver’s side selection controls air dist-
ribution and the recirculation status. The
temperature can be adjusted on the pas-
senger side.
MAX cooling produces:
• Max. cooling effect (A/C compressor will
run even if AC OFF has been selected).
• Air distribution through panel vents.
• Maximum fan speed.
• Recirculation ON.
Condensation water
When the A/C compressor is on, the incom-
ing air is dehumidified. The resulting con-
densation water is drained away through an
outlet under the car.
It is therefore perfectly normal for water to
be seen dripping from this outlet when the
car is parked. The warmer the ambient air
and the higher the humidity, the more con-
densation will form.
93_U S_M 07.book Page 109 W ednesday, A pril 12, 2006 9:30 A M