91 instruments and controls – Saab 2007 9-3 User Manual

Page 91

Advertising
background image

91

Instruments and controls

When the engine is started, the function that
was selected when the engine was
switched off is displayed, with the following
exceptions:

Temp is displayed if the outside tempera-

ture is between 26 and 38°F (–3 and
+3°C).

D.T.E. is displayed if less than or equal to

30 miles (50 km).

Outdoor temperature

The Temp function is always activated
(even in NIGHTPANEL mode) if the outdoor
temperature rises or falls to between 26 and
38°F (–3 and +3°C).

If the temperature sensor, located under the
front bumper, is covered by snow or ice,
temperature readings will be unreliable.

Setting values

1 Select one of the functions using the

steering wheel controls,

or

.

Dist (preset to 100 miles (100 km) if not

previously set)

• Speed Ø
Speed W (preset to 55 mph (90 km/h)

2 Press and hold the SET button until

given audible confirmation.

3 Use the steering wheel controls to select

the value. (Press CLR to reset the
value.)

4 Press the SET button to finish setup.

Using DIST as a trip meter

1 Select Dist using the steering wheel

controls,

or .

2 Press and hold the CLR button for

approx. 1 second.

An arrow will now appear on the right-hand
side of the display, indicating that the trip
meter is running.

SID2 3 also contains the following fea-
tures:

Dist

Distance to destinations.
Function can also be used as
a trip meter

Speed Ø

Average speed since func-
tion last reset

Speed W

Speed warning (chime)

Settings

Settings of features such as
alarm clock, language and
rain sensor 3

Phone 3

Managing of number list, see
Infotainment Manual.

WARNING

Remember that roads can be icy even at
temperatures of above 38°F (+3°C),
especially on bridges and stretches of
road that are sheltered from the sun.

93_U S_M 07.book Page 91 W ednesday, A pril 12, 2006 9:30 A M

Advertising
This manual is related to the following products: