Sony CPD-L133 - Manual (Page 29)

9
Getting Started Customizing Your Monitor
F
D
ES
EN
I
Horizontal
Frequency* Vertical
Frequency*
Before adjusting
Connect the monitor and the computer, and turn them
on.
Wait for at least 30 minutes before making adjustments
for the best result.
Adjusting the Picture Brightness
Once the brightness is adjusted, it will be stored in memory
for all input signals received.
1 Press the ‹ (brightness) ø button.
The BRIGHTNESS OSD appears.
2 Press the +/– buttons.
+ . . . for more brightness
– . . . for less brightness
The OSD automatically disappears after about 3 seconds.
* The horizontal and vertical frequencies for the received input
signal appear in the BRIGHTNESS OSD.
If the screen is too bright when using the monitor in a
dark room
Decrease the BACKLIGHT (page 14).
Customizing Your Monitor
BRIGHTNESS
26
48. 4kHz / 60Hz
Adjusting the Contrast
Once the contrast is adjusted, it will be stored in memory for
all input signals received.
1
Press the > (contrast) ‡ button.
The CONTRAST OSD appears.
2
Press the +/– buttons.
+. . . for more contrast
– . . . for less contrast
The OSD automatically disappears after about 3 seconds.
* The horizontal and vertical frequencies for the received input
signal appear in the CONTRAST OSD.
CONTRAST
26
48. 4kHz / 60Hz
Horizontal
Frequency* Vertical
Frequency*