How to use the on board tools, Heat protection system – Sharp EC-S5170 User Manual

Page 9

Advertising
background image

9

CREVICE TOOL
For door tracks, narrow spots, etc.(Fig.12)

Fig.11

Fig.12

HEAT PROTECTION SYSTEM

This vacuum cleaner has a special thermostat that protects the motor from overheating. If the
vacuum cleaner suddenly shuts off, turn off the vacuum and unplug the cleaner. Check the
vacuum cleaner for a possible source of overheating such as a full dirt compartment or
clogged filters. If these conditions are found, empty the dirt compartment and clean the filters
(see pages 10 and 11) or replace if necessary (see page 15). To maintain the best
performance of your vacuum cleaner, we recommend emptying the dirt compartment before
the dirt reaches the “Max Fill Line” and clean the filters.

HOW TO USE THE ON BOARD TOOLS

EXTENSION WANDS
For reaching ceilings, curtains, etc.(Fig.13)
Combine these wands at the end of suction
hose. (Fig.14-1)
When connecting two wands, match the
illustrated mark to each other.(Fig.14-2)

SUCTION HOSE
For using ON BOARD tools, remove the
suction hose from the nozzle head. (Fig.11)

UPHOLSTERY TOOL WITH DETACHABLE
BRUSH
Use the brush for upholstered furniture, table
tops, books, lamps, baseboards, etc. (Fig.16)
Use without the brush for draperies,
mattresses, clothing, carpeted stairs, etc.
(Fig.15)

Fig.13

Fig.14-1

Fig.15

Fig.16

Pull to Detach brush
from tool

Turn to adjust cleaning angle

Fig.14-2

2001.12.20, 8:07 AM

9

Advertising
This manual is related to the following products: