Sony T610 - Manual (Page 24)

This is the Internet version of the user's guide. © Print only for private use.
24 Calling
Calling
Before you can make or receive any calls, you must
turn on the phone and be within range of a network.
See “Turning the phone on” on page 6.
Making calls
1. Enter the area code and the phone number.
2. Press
CALL to make the call.
3. Press END CALL to end the call.
To change the earpiece volume during a call
Use the volume keys on the side of the phone to
increase or decrease the earpiece volume during
a call.
To turn off the microphone during a call
Press and hold
until the display shows Muted.
Press and hold again to resume the conversation.
Note: The microphone must be turned on to change
the earpiece volume during a call.
Automatic re-dialling
If the connection of the call failed and the display
shows Retry?, press
YES . The phone re-dials the
number (up to ten times):
• Until the call is connected.
• Until you press a key or receive a call.
Note: Do not hold the phone to your ear while
waiting. When the call is connected, the phone
gives out a loud signal.
Automatic re-dialling is not available for fax
and data calls.
Making international calls
1. Press and hold until a + sign appears in
the display.
The + replaces the international prefix number
of the country from which you are calling.
2. Enter the country code, area code (without
the leading zero) and phone number, CALL .
Making emergency calls
• Enter 112 (the international emergency number), CALL .
Your phone supports the international emergency
numbers, 112, 911 and 08. This means that these