Sony T610 - Manual (Page 32)

This is the Internet version of the user's guide. © Print only for private use.
32 Calling
3. If you have several numbers for that contact, after a
second tone, say the number type, for example, “home”.
The number type is played back to you, and the call
is connected.
From standby, you can also initiate voice dialling, voice
profiles and voice control of sound recordings by:
• Pressing and holding a volume key.
• Pressing the handsfree button (when using a
portable handsfree or a Bluetooth headset).
• Saying the magic word. See “The magic word” on
page 33.
Redialling
You can use your voice to redial the last dialled
number, if you record a voice command for redialling.
To turn on and record a redial command
1. Scroll to Settings, Voice control, Voice redial.
2. Select On.
3. Instructions appear. Press
OK .
4. Lift the phone to your ear, wait for the tone and say
“Redial”, or another word. If the recording sounds
OK, press
YES . If not, press NO and repeat step 4.
To redial using a voice command
1. From standby, press and hold a volume key for
one second.
2. Lift the phone to your ear, wait for the tone and say
“Re-dial”. The voice command is played back to
you and the last dialled number is called.
Voice answering
You can answer or reject incoming calls by using
your voice, when using a portable handsfree or a
car handsfree kit.
To turn on voice answering and record voice
answer commands
1. Scroll to Settings, Voice control, Voice answer.
2. Select On.
3. Select the accessories you want to be able to use with
voice answering by pressing CHECK and then SAVE .
4. Instructions appear. Press OK .
5. Lift the phone to your ear, wait for the tone and say
“Answer”, or another word. If the recording sounds
OK, press
YES . If not, press NO and repeat step 5.
6. Say “Busy”, or another word. Press OK .