Preparing the receiver and the remote, Connecting the ac power cord (mains lead), Performing initial setup operations – Sony HT-DDWG700 User Manual
Page 21: Press ? / 1 to turn off the receiver, Hold down ? / 1 for 5 seconds, Ge tting star te d
21
US
Ge
tting Star
te
d
5: Preparing the receiver
and the remote
Connect the AC power cord (mains lead) to a
wall outlet.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the
receiver.
2
Hold down ?/1 for 5 seconds.
After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
Connecting the AC power cord
(mains lead)
AC power cord (mains lead)
To the wall outlet
Performing initial setup
operations
VIDEO IN/
PORTABLE AUDIO IN
PHONES
INPUT SELECTOR
A.F.D.
MOVIE
MUSIC
?/1
DIMMER
SLEEP
2CH
DISPLAY
MASTER VOLUME
INPUT MODE
1,2