SMC Networks SMC2602W - Manual (Page 11)

Continue to the "Utility Installation" section for documentation on how to use the utility
application for your Wireless PCI Card.
5 | Verification
Windows 98/Me
Step 1: Right-click the My Computer icon on your desktop and click [Properties].
Figure 1.0
Step 2: Then go to the [Device Manager] tab and open the [Network adapters] section. You
should see your SMC2602W 11Mbps Wireless PCI Card in this menu. Highlight it and click
[Properties].
Step 3: The Device Status shows that the "This device is working properly". If there are any
error messages displayed here, you will need to click the SMC adapter and click [Remove]. Then
reboot the machine and go through the installation process again.