Getting started, Using the pw-e550 for the first time – Sharp Electronic Dictionary PW-E550 User Manual

Page 4

Advertising
background image

2

Getting Started

Using the PW-E550 for the first time

Be sure to perform the following operations before using the PW-E550 for the first
time.

1. Set the battery replacement switch on the bottom

of the unit to the ‘REPLACE BATTERY’ position.

2. Remove the battery cover.

3. Insert the battery. Make sure the battery polarity

is correct.

4. Replace the battery cover.

5. Set the battery replacement switch to the

‘NORMAL OPERATION’ position.

6. Open the unit and press

o to

turn the power on.

The LCD contrast screen will appear.

• Should a different screen appear,

follow the reset procedure on page
29.

• If the power cannot be turned on:

• Make sure the battery replacement switch is placed at the ‘NORMAL

OPERATION’ position, then press

o again.

• If the power still cannot be switched on, try following steps 1 through 6 in the

above procedure again.

7. Adjust the LCD contrast by using

[

], and press e.

The key sound on/off screen will
appear.

8. Select

Y or N to turn the key sound

on/off.

The main menu screen will appear.

• The LCD contrast and the key sound

settings can be adjusted later in the
Set-up menu.

Advertising