SIGMA SD15 - Manual (Page 100)

99
TO LOCK A SINGLE IMAGE
1
Use the arrows on the 4-way controller to select the image to be locked in
Contact Sheet or Single-Image View.
2
Press to display the Modification Menu.
3
Use the arrows on the 4-way controller to select the Lock Menu ( ).
4
Use the arrows on the 4-way controller to select [Lock].
● If the selected image is already locked, the [Lock] menu item will change to
[Unlock].
5
Press to lock the image.
● A key icon
will appear in the image
indicating that the image is locked.
TIP
•
To unlock a locked image, select the locked image and follow the same steps
as above.
•
If the Lock Menu was opened from Jump Mode, the “Lock” menu item will not
be available.