Samsung SMG-3200 - Manual (Page 53)

3-20
Chapter 3
Installing the System
5. To connect the SMG-3200 and analog terminal such as analog telephone or FAX machine,
connect one end of RJ-11 cable to SLC port of the SMG-3200, and the other end to the port of
analog terminal.
SLC port of SMG-3200 SLC port of SMG-3200 SLC port of SMG-3200 SLC port of SMG-3200
Pin Name
3 Tip
4 Ring
6. Connect the SMG-3200 to the network of the site. Connect one end of a RJ-45 cable (Twisted
pair category-5 straight-through) to the LAN port of the SMG-3200, and the other end of the
cable to the Ethernet port of the hub or switch.
LAN port of SMG-3200 LAN port of SMG-3200 LAN port of SMG-3200 LAN port of SMG-3200 Ethernet port of switch Ethernet port of switch Ethernet port of switch Ethernet port of switch
Pin Name Name Pin
1 Tx+ Rx+ 1
2 Tx- Rx- 2
3 Rx+ Tx+ 3
6 Rx- Tx- 6
7. Connect console terminal. Connect one end of a serial cable to the RS-232C port of the
SMG-3200, and the other end of the cable to the serial port of a PC.
RS-232C port of SMG-3200 RS-232C port of SMG-3200 RS-232C port of SMG-3200 RS-232C port of SMG-3200 9 Pin 9 Pin 9 Pin 9 Pin Serial port of PC Serial port of PC Serial port of PC Serial port of PC
Pin Name Name Pin
2 Tx Rx 2
3 Rx Tx 3
5 GND GND 5